TrackTuner Drum Architect 2.1.0 User Guide

Song-aware drum MIDI for your DAW.

TrackTuner Drum Architect listens to your song and creates editable GM drum MIDI that follows its structure, energy and transitions.

What Drum Architect does
Drum Architect creates editable GM drum MIDI from song audio.
It generates MIDI, not audio. It does not include drum sounds.
To hear drums, drag the MIDI to a track with a drum instrument loaded.
Generated drum MIDI uses GM mapping and is intended for MIDI channel 10.
This package is for Linux x86_64, glibc 2.35 or later, with VST3 and CLAP. See INSTALL.txt.

Where to place the plugin
Insert Drum Architect on the master bus, or another bus that receives the whole mix.
If you insert it on a single instrument track, Drum Architect will only hear that track.

Quick start
1. Install the DEB or follow the manual instructions in INSTALL.txt.
2. Restart or rescan your DAW.
3. Open a project with song audio.
4. Insert Drum Architect on the master bus, or a bus that receives the whole mix.
5. Play the full mix and check that INPUT responds. Return the playhead to the start of the section you want to capture.
6. Press SCAN AUDIO and start playback. If the DAW is already playing and audio is reaching the plugin, capture can start immediately.
7. Press STOP CAPTURE when you have enough audio. Stopping playback or sustained silence also ends capture.
8. Wait for ANALYZING… to finish and MIDI READY to appear.
9. Drag the MIDI into a DAW track with a GM-compatible drum instrument.
10. If drag-and-drop does not work in your DAW, use SAVE MIDI... and import the saved file.
11. Change DRUM FEEL, FILL STYLE or a Drum Behavior knob if needed.
12. Press REGENERATE MIDI after changing settings.
13. Drag or save the new MIDI again to use the updated result.

Best first scan
For your first scan, start playback just before a chorus, drop, or section with a clear build.
This usually shows the song-following behavior more clearly than scanning a sparse intro.

How it works
Drum Architect does not generate audio, stems or loops.

It listens to the audio you play from your DAW, analyzes the musical movement in the captured section, and creates editable GM drum MIDI that follows the song.

In plain language, it looks for musical cues such as:
- where the track is quiet or busy
- where energy rises or drops
- where sections change
- where transitions need support
- where the drums should leave space
- where a stronger entry, fill or groove movement may help

It then turns that analysis into a MIDI drum performance using the selected Drum Feel and Drum Behavior settings.

The result is not a finished audio file. It is MIDI that you can edit, replace, quantize, delete, rearrange or send to any compatible drum instrument in your DAW.

What it is and is not
Drum Architect is:
- a song-aware drum MIDI generator
- a local audio analysis tool
- a fast way to create an editable drum draft
- designed to work with your existing drum plugins

Drum Architect is not:
- a drum sound library
- an audio loop pack
- a stem generator
- a cloud AI song generator
- a replacement for editing, taste or production decisions

Short explanation
TrackTuner Drum Architect analyzes the song locally and creates editable GM drum MIDI that follows the arrangement. It does not upload audio, generate finished audio, or replace the drum instrument. It gives you a song-aware MIDI drum draft that you can edit in the DAW.

Scan Audio explained
The INPUT meter in the analyzer header shows the signal reaching the plugin, even before you press SCAN AUDIO.
On first opening, the empty analyzer prompts you to insert Drum Architect on your master output and play the full mix. The prompt gives way to the scan display.
SCAN AUDIO arms Drum Architect. WAITING FOR AUDIO means it is ready to capture when usable audio reaches it during playback. CANCEL SCAN disarms it while waiting.
A red dot and the REC timer appear when capture actually starts. Press STOP CAPTURE when done. ANALYZING… appears while Drum Architect builds the MIDI.
Select the ? button next to Settings for Quick Start and a summary of the fill styles.

MIDI drag explained
The MIDI drag target is inactive until MIDI is ready.
Drag MIDI to a MIDI or instrument track, not an audio track.
Load a drum plugin on that track. A GM-compatible drum instrument is recommended.
If drag-and-drop does not work in your DAW, use SAVE MIDI... and import the saved .mid file manually.

Regenerate explained
REGENERATE MIDI does not record the song again.
It uses the last captured audio and the current DRUM FEEL, FILL STYLE and Drum Behavior settings to create a new MIDI version.
After regeneration, drag or save the MIDI again into your DAW to use the new version.

MIDI you have already dragged into your DAW stays as it was when you exported it.
Press REGENERATE MIDI, then drag the updated MIDI again.

Drum Feel
CLEAN POP
Balanced, modern, clean drum arrangement.

HOUSE FLOW
Steady dance-oriented groove with flowing movement.

CLUB DRIVE
More driving energy for club, EDM and high-energy sections.

TRAP BOUNCE
Trap-inspired bounce, tighter movement and hat detail.

ORGANIC KIT
More natural, acoustic-style drum behavior.

SYNTHPOP
Choose SYNTHPOP in the DRUM FEEL selector. In 4/4, the default groove for active sections has a kick on every beat, snare on beats 2 and 4, and 16 closed hi-hat hits per bar with a velocity accent on each offbeat (“and”). The last offbeat can add an open hi-hat at the end of a phrase. The full hat pattern plays from the first active bar after a build, including when a crash marks the entry.

Fill Style
Choose a pattern in FILL STYLE. The FILLS knob adjusts how often fills are used. For existing 2.0 projects and presets, the default is ROLLS. The selected style is saved in host projects and plugin presets.

ROLLS
Original transition fills, including snare and tom rolls.

BOUNCE
Short, syncopated accents with snare, clap or light percussion. It avoids accelerating rolls and tom fills.

TOM FILL
Four sixteenth notes on beat 4, played high tom, high tom, mid tom, low tom. A kick lands on beat 1 of the next bar.

SNARE BUILD
Snare hits grow louder on beats 1, 2, 3, the “and” of 3, and all four sixteenth notes of beat 4. The kick plays all four beats.

DRUM STOP
The groove plays through beats 1 and 2. Beat 3 is silent, beat 4 has a single heavy snare hit, and the groove returns on beat 1 of the next bar.

TOM FILL, SNARE BUILD and DRUM STOP use fixed MIDI patterns in 4/4. They are applied at eligible transitions with a following groove. In other time signatures these three selections use the original fill behavior.

Drum Behavior knobs
Each knob runs from -10 to +10, with 0 at the default. The current value appears between the two endpoint labels.

SPACE
Controls how much room the drums leave in quieter parts and breaks.
Lower values: more continuous drums.
Higher values: more space and restraint.

RISE
Controls build-up movement into larger sections.
Lower values: calmer builds.
Higher values: stronger build-up motion.

IMPACT
Controls how strongly the drums hit in high-energy sections.
Lower values: lighter entries and drops.
Higher values: fuller, harder-hitting entries and drops.

MOVEMENT
Controls rhythmic detail and variation.
Lower values: simpler grooves.
Higher values: more hat/percussion movement and variation.

TIGHTNESS
Controls how locked-in the drum pattern feels.
Lower values: looser/more relaxed feel.
Higher values: tighter, more grid-locked kick/snare behavior.

FILLS
Controls how often transition fills are added.
Lower values: fewer fills.
Higher values: more fills between sections.

LCD/status glossary
READY TO SCAN: Drum Architect is idle and ready.
PRESS SCAN AUDIO: Start arming a new scan.
PLAY THE FULL MIX: Play your mix through the bus where Drum Architect is inserted.
SCAN ARMED: SCAN AUDIO has been pressed and Drum Architect is ready to capture.
WAITING FOR AUDIO: Drum Architect is armed and waiting for usable input during playback.
REC mm:ss: Recording is in progress. The timer shows elapsed capture time. In demo mode, DEMO LIMIT 1:00 also appears.
CAPTURING AUDIO: Drum Architect is recording the audio it receives.
STOP CAPTURE WHEN DONE: Stop capture in Drum Architect when you have enough material.
AUTO-STOPS ON SILENCE: Capture also stops after sustained silence.
DEMO LIMIT REACHED: The demo capture limit was reached and Drum Architect will generate from the captured audio.
ANALYZING…: Capture has finished and Drum Architect is analyzing the audio and building the MIDI.
BUILDING MIDI: Drum Architect is preparing the MIDI result.
MIDI READY: The generated MIDI can now be dragged into your DAW.
m:ss CAPTURED: Shows how much audio was captured.
DRAG OR SAVE MIDI: Drag the MIDI to your DAW, or save a .mid file.
SAVE MIDI...: Save the generated MIDI as a .mid file if drag-and-drop does not work in your DAW.
TWEAK, REGENERATE: Change DRUM FEEL, FILL STYLE or the Drum Behavior knobs, then press REGENERATE MIDI.
DEMO PERIOD ENDED: Activate a license to continue generating MIDI.
LICENSE ISSUE: Check the license status in Settings.
ERROR: Something prevented capture or generation.
CHECK AUDIO: Check that Drum Architect receives audio and that the setup is correct.
NO AUDIO DETECTED: The plugin did not receive usable audio.
CAPTURE TOO SHORT: The captured section was too short to generate a reliable result.
CAPTURE LIMIT REACHED: The maximum capture length was reached and Drum Architect will generate from the captured audio.

Arrangement Intelligence
Arrangement Intelligence summarizes how Drum Architect understood the last generated result. It is there to help you see what settings and musical context were used when the MIDI was created.

LAST GENERATED WITH
Shows the Drum Feel and settings used for the current MIDI result.

CURRENT FEEL
Shows the selected Drum Feel.

USER SETTINGS
Shows the current Drum Behavior values such as SPACE, RISE, IMPACT, MOVEMENT, TIGHTNESS and FILLS.

ARCHITECT CONFIDENCE
A simple confidence readout for the arrangement interpretation. It is not a quality score and does not mean the MIDI is good or bad. Use your ears and regenerate if you want another version.
Confidence may show as low, medium or medium/high.

5-minute capture cap
Each capture is capped at 5 minutes with an active license, or 1 minute during the demo.
Captured audio is held temporarily while Drum Architect analyzes the song and builds MIDI.
The cap helps reduce host memory pressure and avoids unnecessary stress in DAWs such as Ableton Live.
It does not reduce MIDI quality.

For longer tracks, scan in sections. Each scan produces editable MIDI that can be placed in your DAW arrangement.

Settings window
LICENSE: Enter your license key or serial.
ACTIVATE LICENSE: Activates Drum Architect on this computer.
REMOVE LICENSE FROM THIS COMPUTER: Asks the license server to release this computer. The local license is removed only after the server confirms deactivation. Use this before an OS reinstall or moving to a new computer. If Drum Architect cannot connect, the local license is kept so you can try again when online.
STATUS: LICENSE ACTIVE: Your license is active.
STATUS: INVALID LICENSE KEY: The key was rejected. Check the paste and make sure there are no extra spaces.
STATUS: WRONG PRODUCT: The key belongs to a different product. Use a license for the original Drum Architect, rather than Drum Architect Live.
STATUS: ACTIVATION LIMIT REACHED: The license cannot activate another computer.
STATUS: COULD NOT CONNECT: The activation server could not be reached. Check your internet connection and try again.
STATUS: REMOVE FAILED / COULD NOT CONNECT: The server could not confirm removal. Your local activation is retained. Try removal again when the connection is available.
STATUS: TRY AGAIN LATER: The license service has requested a wait before another attempt.
STATUS: ACTIVATION PENDING / CONTACT SUPPORT: Contact TrackTuner support to reconcile an activation that could not be confirmed.
OPEN TRACKTUNER.COM: Opens tracktuner.com.
RESET SETTINGS: Resets Drum Feel, Drum Behavior and local UI settings after confirmation.
VERSION 2.1.0 | VST3 or CLAP: Shows the installed plugin version and format.

Demo and license
The demo uses the same MIDI generation quality as the licensed version. Only capture length and demo duration are limited.
Demo mode captures up to 1 minute per scan for 7 days.
The 7-day demo starts the first time the plugin is opened on the computer.
One license. Full MIDI quality. Captures up to five minutes.
Standard licenses allow activation on up to two computers. Existing unlimited-device entitlements are supported.
When updating an existing Drum Architect 2.x installation on the same computer, leave the license in place and replace the whole VST3 bundle with the DAW closed. Drum Architect periodically checks existing activations online through TrackTuner. Existing Drum Architect 2.x keys and current keys use the same activation controls. Cached full access can continue for up to 14 days after a successful check, subject to the confirmed license expiry.
Captured analysis is session-based. If you close and reopen the project, scan the song again before dragging, saving or regenerating MIDI.

Privacy/local processing
Your audio never leaves your computer. Drum Architect analyzes the captured audio and generates MIDI on your machine.
Activation may require a brief internet connection, but audio analysis and MIDI generation do not require uploading your song.
No audio uploads. No usage analytics.

FAQ
Is Drum Architect AI?
Drum Architect is not a cloud AI music generator and it does not create finished audio.
It uses local audio analysis and deterministic MIDI generation to create drum MIDI from your own song audio.
The result is editable MIDI, not a black-box audio file. Your audio stays on your computer.

Is this AI slop?
No. Drum Architect does not generate a finished song, replace the producer, or create random audio.
It creates a structured MIDI drum draft based on your own track. You stay in control: choose the Drum Feel, adjust the Drum Behavior knobs, regenerate if needed, and edit the MIDI in your DAW.

How can it follow my song?
Drum Architect analyzes the captured audio for musical movement: energy, density, silence, transitions and section changes.
It uses that information to decide where the drum MIDI should be simpler, fuller, tighter, more open, or more active.
It is designed to create a useful drum starting point that follows the arrangement instead of forcing a static loop over the whole song.

Troubleshooting
The plugin does not appear in my DAW
- Confirm that your DAW supports Linux VST3 or CLAP plugins.
- Copy TrackTuner Drum Architect.vst3 to /usr/lib/vst3 or ~/.vst3.
- Restart or rescan your DAW.
- Remove old beta bundles if relevant.
- In Ableton, force a full rescan if needed.

Scan Audio does nothing
- Press SCAN AUDIO, then press Play in your DAW.
- Insert Drum Architect on the master bus or a bus with audio.
- Play the full mix and watch the INPUT meter in the analyzer header.

It says Waiting for Audio
- DAW playback has not sent audio to the plugin yet.
- Start playback where music is playing.
- Avoid long silence or fade-in for the first test.

Capture stops early
- Drum Architect can stop after sustained silence.
- Start playback where the music is playing.
- For long songs, scan in sections.

MIDI is ready but I hear no sound
- Drum Architect creates MIDI, not audio.
- Drag MIDI to an instrument or MIDI track.
- If drag-and-drop does not work, use SAVE MIDI... and import the saved file.
- Load a drum plugin on that track.

The wrong drum sounds play
- Use a GM-compatible drum kit or set your drum plugin to a GM/standard map.

I changed knobs but the MIDI did not change
- Press REGENERATE MIDI.
- Then drag the updated MIDI again.

Regenerate is disabled
- Scan audio first.
- Regenerate requires a previous valid capture.

License says Could not connect
- Check your internet connection.
- The activation server may not be reachable.
- Try again.

License says Invalid license key
- Check spelling and paste.
- Make sure there are no extra spaces.
- Contact support if it should be valid.

I have a song longer than 5 minutes
- Scan in sections.
- Each scan creates editable MIDI.
- Place each MIDI result in the DAW arrangement.

Platform support
Available for Linux as VST3 and CLAP.
Use a Linux DAW with VST3 or CLAP support.

Support
tracktuner.com
